Análise experimental e numérica da distribuição das ações verticais entre paredes de alvenaria estrutural com a utilização de modelo físico reduzido na escala 1:5
Data
2017-11-15
Autores
Título da Revista
ISSN da Revista
Título de Volume
Editor
Biblioteca Digital de Teses e Dissertações da USP
Universidade de São Paulo
Escola de Engenharia de São Carlos
Universidade de São Paulo
Escola de Engenharia de São Carlos
Resumo
Descrição
O presente trabalho teve como objetivo principal a análise experimental da distribuição das ações verticais entre paredes de alvenaria estrutural com a utilização de modelo físico reduzido na escala 1:5. Precedendo a construção do modelo físico reduzido foram realizados ensaios de caracterização dos componentes e da alvenaria na escala reduzida 1:5. Os ensaios no modelo físico reduzido consistiram na inserção de carregamentos uniformemente distribuídos e aplicados em diferentes ambientes e níveis. A análise da distribuição das ações verticais foi possível devido à instrumentação realizada na base do modelo físico reduzido através de células de carga. Os resultados foram analisados comparando-se os resultados experimentais com os usuais procedimentos teóricos de distribuição das ações verticais e também com a modelagem por elementos finitos; visando, desta forma, identificar qual o procedimento que mais se aproxima dos resultados experimentais. Foi possível concluir que a modelagem por elementos finitos e o procedimento de Grupos de Paredes apresentaram resultados mais próximos dos experimentais na análise da distribuição das ações verticais.
This study had as a main aim the experimental analysis of vertical loads distribution between structural masonry walls using a reduced physical model in a 1:5 scale. Preceding the building of the physical model were performed tests in order to obtain characterization of the components and of the masonry in a 1:5 reduced scale. The tests in the reduced physical model consisted in the insertion of loads uniformly distributed and applied in different environments and levels. The analysis of the vertical loads distribution was possible due to instrumentation performed on the basis of the physical model by load cells. The results were analyzed by comparing the experimental results with the usual theoretical procedures of vertical loads distribution and also with the modeling by finite elements; aiming, this way, to identify which procedure is closer to the experimental results. It was concluded that modeling by finite elements and Walls Groups procedure showed results closer to the experimental analysis of vertical loads distribution.
This study had as a main aim the experimental analysis of vertical loads distribution between structural masonry walls using a reduced physical model in a 1:5 scale. Preceding the building of the physical model were performed tests in order to obtain characterization of the components and of the masonry in a 1:5 reduced scale. The tests in the reduced physical model consisted in the insertion of loads uniformly distributed and applied in different environments and levels. The analysis of the vertical loads distribution was possible due to instrumentation performed on the basis of the physical model by load cells. The results were analyzed by comparing the experimental results with the usual theoretical procedures of vertical loads distribution and also with the modeling by finite elements; aiming, this way, to identify which procedure is closer to the experimental results. It was concluded that modeling by finite elements and Walls Groups procedure showed results closer to the experimental analysis of vertical loads distribution.
Palavras-chave
Ações verticais, Alvenaria estrutural, Modelo físico reduzido, Reduced physical model, Structural masonry, Vertical loads